Description :
This BMW motorcycle side stand foot is designed for the R1150GS, 2001 – 2005. This side stand foot increases the area of the pad to 3-3/4″ x 3″ to help prevent tip overs. Made of 6061 aluminum and steel. Black powder coat. Screws are stainless steel. Easy installation, simple bolt-on. No drilling or modifications required.
The Z2483 is significantly taller and wider than the tiny stock screen, and gives the S1000R rider genuine touring comfort without sacrificing the cutting edge sporting appearance.
Does not fit bikes that have been factory lowered.

Description :
If you are a shorter rider, or looking for a sportier look, ZTechnik’s Z2241 may be just the right alternative to the Z2240 Replacement Screen. The Z2241 is still wider and 4.00″ taller than the stock windscreen for a significant improvement in wind protection.
Like the Z2240, it features FMR hardcoated Lexan® polycarbonate strength and excellent optics.
Covered by ZTechnik’s 3-Year Warranty against breakage!
ZZTechnik® by National Cycle:
Accessories Exclusively for BMW® Motorcycles.
color :
Light Gray, 26% Tint
Dimensions :
Height: 18.00″ (45.7cm)
Width: 18.00″ (45.7cm)
Measured vertically from the bottom center edge to the top of the screen, and horizontally across the back at the widest point.

Description :
Take away irritating wind noise, fatigue, debris, and rain with ZTechnik’s generously sized, FMR hardcoated Lexan® polycarbonate Replacement Screen. This R1150GS screen is designed to smooth out wind turbulence, protect you from the elements, and offer you a viewing area with superior optical quality to keep you comfortable during your ride.
The Z2240 is actually 100% larger and 7 inches taller than stock. R1150 GS Adventure models require additional BMW parts for installation. Download the PDF instruction sheet for specific information.
Covered by ZTechnik’s 3-Year Warranty against breakage!
ZTechnik® by National Cycle:
Accessories Exclusively for BMW® Motorcycles.
color :
Clear
Dimensions :
Height: 21.75″ (55.2cm)
Width: 18.50″ (47.0cm)
Measured vertically from the bottom center edge to the top of the screen, and horizontally across the back at the widest point.

Description :
ZTechnik’s extremely versatile 4-liter rear Storage Pod is a great addition or alternative to the standard tank bag.
In addition to the main compartment, three zippered storage pockets and a map compartment are attached to a cleverly designed removable tray. If you need one large storage area, the Velcro® hinge makes removal of the tray a snap. Sturdy double zippers keep everything secured inside while the Pod’s web straps and coated hooks attach it to the bike.
ZTechnik® by National Cycle:
Accessories Exclusively for BMW® Motorcycles.
color :
Black

Description :
Ilium Works announces a significant improvement in BMW Highway Peg design for R1100R with horizontal style engine guard bars such as ZTechnik. Our new Highway Peg design is superior to existing designs for several reasons.
First of all is the mounting system that bolts securely to the 25mm engine guard bars that run horizontally under the head, such as Ztechnik bars or possible the Hepco-Becker bars and not to the heads or valve covers.
Second, our large size urethane foot pad is very comfortable and rocks to accommodate different foot positions.
Third is the 3” of length adjustment that allows riders of different inseam lengths to be equally comfortable.
Fourth, these Highway Pegs fold away neatly under the head when not in use, preserving the uncluttered look of your BMW.
NOTE: Engine guard bars not included.
Will fit with most valve cover protectors. Some adjustments maybe required.
Will fit some 22mm engine guard bars such as Wunderlich and Touratech. Part# 19-XXX is required.
Will not fit 28mm engine guard bars.
Also available in BLACK ANODIZE, part# 19-200BL.

Description :
This versatile mounting system allows the use of our popular highway pegs with the NEW 2013 and up R1200GS the 2014 R1200GSA water/liquid cooled stock engine guards and Ilium Works NEW engine guard bars for the 2014 and up R1200RTW. Also along with many aftermarket engine guards including Wunderlich, Altrider and Touratech. Our unique ball joint design offers a variety of compound angle mounting possibilities that can be configured with either rearward or upward folding. Once positioned the ball joint is then rigidly locked into position. These are CNC machined from 6061 aluminum alloy, anodized and assembled using stainless steel hardware to give you years of comfort and trouble free service. Fits 25mm bars or 22.5mm bars with our spacers.
Please specify diameter when ordering.
NOTE:
Highway pegs sold as a pair.
SLEEVE,22.5MM-25MM, Part# 19-XXX is required for 22.5mm bars.
Engine guard bars not included.

Description :
This versatile mounting system allows the use of our popular highway pegs with the NEW 2013 and up R1200GS the 2014 R1200GSA water/liquid cooled stock engine guards and Ilium Works NEW engine guard bars for the 2014 and up R1200RTW. Also along with many aftermarket engine guards including Wunderlich, Altrider and Touratech. Our unique ball joint design offers a variety of compound angle mounting possibilities that can be configured with either rearward or upward folding. Once positioned the ball joint is then rigidly locked into position. These are CNC machined from 6061 aluminum alloy, anodized and assembled using stainless steel hardware to give you years of comfort and trouble free service. Fits 25mm bars or 22.5mm bars with our spacers. Please specify diameter when ordering.
NOTE:
Highway pegs sold as a pair.
SLEEVE,22.5MM-25MM, Part# 19-XXX is required for 22.5mm bars.
Engine guard bars not included.

Description :
Ilium Works announces a significant improvement in BMW Highway Peg design for R1100R with horizontal style engine guard bars such as ZTechnik.
Our new Highway Peg design is superior to existing designs for several reasons.
First of all is the mounting system that bolts securely to the 25mm engine guard bars that run horizontally under the head, such as Ztechnik bars or possible the Hepco-Becker bars and not to the heads or valve covers.
Second, our large size urethane foot pad is very comfortable and rocks to accommodate different foot positions.
Third is the 3” of length adjustment that allows riders of different inseam lengths to be equally comfortable.
Fourth, these Highway Pegs fold away neatly under the head when not in use, preserving the uncluttered look of your BMW.
NOTE: Engine guard bars not included.
Will fit with most valve cover protectors. Some adjustments maybe required.
Will fit some 22mm engine guard bars such as Wunderlich and Touratech. Part# 19-XXX is required.
Will not fit 28mm engine guard bars.
Also available in BLACK ANODIZE, part# 19-200BL.

Description :
This custom made oil filter wrench for your BMW factory oil filters on some of the NEWER model bikes and early model “K” bikes and “Oil Head R Bikes” is CNC machined from 6061 aluminum then anodized. Easily remove and install oil filters on the 2013 + R1200GS (WATER COOLED), 2014 R1200GSA (WATER COOLED), 2014 R1200RT (WATER COOLED), K1, K100, K100RS, K100RT/LT, K1100LT, K1100RS, K1200GT (06-08 only), K1200LT, K1200RS, K1300GT, K75/C, K75RT, K75S, R1100/850R, R1100GS, R1100RS, R1100RT, R1100S, R1150GS/Adv, R1150R, R1150RS, R1150RT, R1200C, R1200CL. Can be used with either an 3/8″ ratchet or 19mm wrench.

Description :
This custom made BMW motorcycle shift extension increases the length of the shift lever by more than 3/4″. The shift extension is CNC machined from 6061 aluminum then black anodized.
To install the shift extension you simply push the shift extension over the shift lever. The shift extension has barbs machined on the inside to securely hold it in place. Easy installation, simple slip-on. No drilling or modifications required.